Specifies a language for phone displays. Range is 0 to 4. Default: 0. This argument is required when defining some locale other than the default 0. Default: US United States. Specifies a country for tones and cadences. Use this command after you update configuration file parameters such as the user locale or network locale. Exits telephony-service configuration mode.
Enters ephone-template configuration mode. Assigns a user locale to this ephone template. Assigns a network locale to this ephone template. Exits ephone-template configuration mode. Applies an ephone template to an ephone. Performs a complete reboot of all phones or the specified phone, including contacting the DHCP and TFTP servers for the latest configuration information.
Range is 0 to Default is Use the show telephony-service tftp-bindings command to display a list of configuration files that are accessible to IP phones using TFTP, including the dictionary, language, and tone configuration files.
Ensure that per-phone configuration files are defined with the cnf-file perphone command. Use the show telephony-service ephone-template command to check the user locale and network locale settings in each ephone template.
Use the show telephony-service ephone command to check that the correct templates are applied to phones. If the configuration file location is not TFTP, use the debug tftp events command to see which files Cisco Unified CME is looking for and whether the files are found and opened correctly.
The file is found when all three states are displayed. Each TAR file also includes the file g4-tones. Use the appropriate directory name shown in Table 1 and remove the two-letter language code from the JAR file name. Assign the locales to the phones. To set a default locale for all phones, use the user-locale and network-locale commands in voice register global configuration mode.
Use the create profile command to rebuild the configuration files. Use the complete filename, including the file suffix. Use the create profile command in voice register global configuration mode to generate the configuration profile files required for Cisco Unified SIP IP phones. Generates provisioning files required for SIP phones and writes the file to the location specified with the tftp-path command.
Exits voice register global configuration mode. Exits voice register template configuration mode. Enters voice register pool configuration mode to set phone-specific parameters for a SIP phone. Use the show voice register tftp-bind command to display a list of configuration files that are accessible to IP phones using TFTP, including the dictionary, language, and tone configuration files.
Use the show voice register template all command to check the user locale and network locale settings in each ephone template.
Use the show voice register pool all command to check that the correct templates are applied to phones. The following example sets the default locale of 0 to Germany, which defines Germany as the default user and network locale. Germany is used for all phones unless you apply a different locale to individual phones using ephone templates.
After using the previous commands to define Germany as the default user and network locale, use the following commands to return the default value of 0 to US:.
Another way to define Germany as the default user and network locale is to use the following commands:. After using the previous commands, use the following commands to return the default to US:. The default is US for all phones that do not have an alternative applied using ephone templates. The following example shows user-locale tag 1 assigned to code U1, which is defined as ZH for Traditional Chinese. Traditional Chinese is not predefined in the system so you must download the appropriate XML files to support this language.
The default is US English for all phones that do not have an alternative applied using ephone templates. The following is a sample output from the user-locale command when you configure the Chinese language as the user-defined locale in Cisco Unified CME:. The following is a sample output from the user-locale command when you configure the Swedish language as the system-defined locale in Cisco Unified CME:. The following example is the output from the user-locale command when you configure a system-defined locale for Cisco Unified CME and the locale is on the default locale index user-locale-tag 0.
The user-locale-tag argument is required only when using multiple locales; otherwise, the specified language is the default applied to all SCCP phones.
The following example is the output from the user-locale command when you configure a user-defined locale for Cisco Unified CME and the locale is on the default locale index user-locale-tag 0. The user-locale-tag argument is required when using multiple locales, otherwise the specified language is the default applied to all SCCP phones.
The following example is the output from the user-locale command if you configure a user-defined locale as an alternate locale for a particular SCCP phone ephone 1 in Cisco Unified CME. The user-locale-tag argument is required only when using multiple locales. In this configuration, the locale is user-defined Finnish U2 on user-locale index 2. The following example shows how the locale installer only requires you to copy the locale file using the copy command in privileged EXEC configuration mode to configure a locale on a Cisco Unified SIP IP phone.
Your system does not allow more than ten concurrent polling queries. We recommend a maximum of eight trap destinations; anything higher will affect CPU performance. This requirement applies to all installations regardless of the OVA template that you use. Configure the system contact and location for the MIB2 system group.
Change the configuration of the virtual machine as needed through vSphere. Check for Updates. Click Update. If you are not aware of the host click Check statuts and click Upgrade to match host. Following warning messages appears in ESXi while opening the Virtual Machine settings while running when there is a mismatch. You should specify the correct guest OS to allow for guest-specific optimizations. If you have installed a new cluster or new node for the IM and Presence Service, complete these tasks after your installation.
Where indicated, refer to that guide for detail on how to complete these tasks. You must complete this task on each server that you install in an IM and Presence cluster. Skip to content Skip to search Skip to footer. Book Contents Book Contents. Find Matches in This Book. PDF - Complete Book 2. Updated: November 17, Chapter: Postinstallation Tasks. Step 4 Enable the Kerneldump Utility If you have a kernel crash, the kerneldump utility provides a mechanism for collecting and dumping the crash.
Step 5 Install Licenses Verify that you have the required licenses for your system and devices. Step 6 Configure the Backup Cisco recommends performing regular backups.
Step 7 Install New Locales Optional. Step 8 COP File Installation Guidelines You may need to install a COP file after the installation to fix a known defect, or to enable support for a custom device type that you want to use that does not ship with Unified Communications Manager. Step 10 Activate Security Optional. Step 2 Click Find. Step 3 Click on an application user. The details of the application user appear in the Application User Configuration window.
Step 4 Enter the new password in both the Password and Confirm Password fields. Step 5 Click Save. Step 6 Repeat this procedure for each application user. Verify that the Unified RTMT version that you install is compatible with the product that you are monitoring. If the Unified RTMT version that you are using is not compatible with the server that you want to monitor, the system prompts you to download the compatible version.
Step 4 Download the executable to the preferred location on your client. The extraction process begins. Step 8 To accept the license agreement, click I accept the terms of the license agreement ; then, click Next. Step 9 Choose the absolute path of Java Virtual Machine executable from your system java.
Step 11 To begin the installation, click Next. Step 12 To complete the installation, click Finish. Enable the Kerneldump Utility Use this procedure to enable the kerneldump utility. Step 2 Complete either of the following: To dump kernel crashes on the local server, run the utils os kernelcrash enable CLI command. Step 3 Reboot the server. Install Licenses Make sure that you acquire the necessary licenses. Configure the Backup Cisco recommends performing regular backups.
User Locales User locale files contain language information for a specific language and country. These files use the following naming convention: cm-locale-language-country-version. The combined network locale file uses the following naming convention: cm-locale-combinednetworklocale-version. If you are installing a locale for both products, install the locale on all cluster nodes in the following order: Unified Communications Manager publisher node Unified Communications Manager subscriber nodes IM and Presence database publisher node IM and Presence subscriber nodes Before you begin Make sure that you have completed your installation or upgrade of Unified Communications Manager or IM and Presence Service on all cluster nodes before you attempt to install a new locale.
When creating a new extension, be aware of the automatically generated password, it is too long for the config file for the phone, the maximum password length is 16 characters. Once the configuration files have been made, plug in a handset and let it boot, it will pick up all the settings and should register correctly. Time to get your hands dirty. FreePBX does not come with the Asterisk source files but they do have source RPMs available that contain pretty much everything you need.
The patch process is simple enough:. Use the command:. Then it's just a case of unpack the files, tell FreePBX about the new patch, compile the files and install them:. And that's it! Reboot the server to make sure everything is settled in and you should be left with a working version of Asterisk 13 with the Cisco patches included.
Three files are needed directly from Cisco. To download them, you need a Cisco login, which for basic levels is free. You need the firmware files for your phone, the user locale and the network locale. Check the website linked earlier for some decent instructions on how to get and use those files. In fact, spend some time reading everything else on that site while you're at it. Each phone must have a complete configuration file, they don't use templates in the way other SIP phones do.
The file is lengthy, so I have added comments inline rather than explaining here. The shown file is for a phone with a MAC address of and configured as extension for a server at pbx. You can use a file named XMLDefault. The file is named with the prefix of the type of phone, these devices use 'SEP' followed by the mac address of the phone with no separators and in uppercase, and has a.
The phone uses this to recognise a changed file and it will extract the timestamp from the one in the main file to show a 'last configured' value. When the phone loads the config file, it is checked for errors and the phone will refuse the file if errors are found, it will not however give any indication of where those errors may be.
The series prefers to use the feature policy file to control the softkeys at the bottom of the display, but can be instructed to use a softkeys. After installation has completed, it is essential to reboot each and every platform in order for all user and network locale changes to become fully activated. Starting Version Option A: Install locale from network drive:. Choose Remote Filesystem from the Source list. Enter the path to the directory that contains the local installer file on the remote system in the Directory field.
If the upgrade file is located on a Linux or Unix server, you must enter a forward slash at the beginning of the directory path. If the upgrade file is located on a Windows server, check with your system administrator for the correct directory path. In the Server field, enter the server name or IP address. In the User Name field, enter your user name on the remote server. Surveys Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites.
Contests and Drawings Occasionally, we may sponsor a contest or drawing. Newsletters If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information informit. Service Announcements On rare occasions it is necessary to send out a strictly service related announcement. Customer Service We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.
Other Collection and Use of Information Application and System Logs Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Web Analytics Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site.
Cookies and Related Technologies This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Security Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure. Children This site is not directed to children under the age of Marketing Pearson may send or direct marketing communications to users, provided that Pearson will not use personal information collected or processed as a K school service provider for the purpose of directed or targeted advertising.
Such marketing is consistent with applicable law and Pearson's legal obligations. Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing. Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn. Sale of Personal Information Pearson does not rent or sell personal information in exchange for any payment of money. Supplemental Privacy Statement for California Residents California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice.
Sharing and Disclosure Pearson may disclose personal information, as follows: As required by law.
0コメント